Get a Free Quote
  1. Home
  2. Family Pack – Auto Feed ModEL-AE/FP/AF/40

Family Pack – Auto Feed ModEL-AE/FP/AF/40

Family Pack Auto wrapping is one of the best solutions in Biscuit and Bakery industries for packaging of different types of packets with double to four row provisions in one packet. Fully automatic with single Shute hopper feeding belt conveyor and the auto stack selection by pusher and loader make it very effective and reduces the man power to a cert in limit.The PLC controlled with touch screen and panel make it user friendly and is easy to set the parameters. The speed can be varied up to 50 packets per minute according to number of rows.

Dimensional Drawings

Machine Specifications &
Technical parameters

Electrical Data

Power Supply 3 Phase, 6 KW 440 V With neutral.
Main & Paper Motor 3 phase/1phase 6 Lead 2 HP & 1 HP1440 rpm, 440 V, 50 Hz
Main & Paper VFD 230 V, 2 HP each Input Output
  Single Phase 3 Phase
Jaw Heater 50 V, 350 W – 4 No (Check the actual wattage)
Dish Heater 50 V, 400 W – 4 No (Check the actual wattage)
Transformer Primary- 2 Phase, 440 V, Secondary – 50 V, 30 A+ 30 A

Technical Parameters & Specifications

Product Size Rang 50 mm (W) x 30 mm (HT) x 5 mm (THK) To 60 mm (W) x 60 mm (HT) x 8 mm (THK)
Stack Size Range SO mm to 250 mm
Wrapper Size Range
Type of Product 		120 to 350 mm Cutoff Length & 150 to 460 mm wrapper width Should be stiff or hard and round or rectangle or square in shape.
Speed 20 to 50 (PPM) (depending upon the size of the product & no of rows).
Feeding Single hopper feeding with belt conveyor.
Control PLC controlled
Machine Dimension 5350 (L) x 2000 (W) x 1675 (H)
Weight 1200 kg (Approx.)
Wrapping Material BOPP laminated, LD Polyester, Heat Sealable Laminates Containing Aluminum Foil. Maximum 12″ Roll diameter.
 

(Note: The designs/specifications are subject to change without notice on account of continuous improvement in machine quality).

Special Features​

  • 01 PLC controlled with touch screen & password protection for the machine settings.

  • 02 Easy to set the different cutoff lengths by putting the desired value in HMI (optional as per model selection) & as well as adjust the jaw dwell position in one stand operation.

  • 03 Malfunction display through self-alarm with message.

  • 04 Quick change over for different varieties of products. Also auto selection of number of rows in HMI (in servo-controlled machine) is one of the advantages because of less change over.

  • 05 AC motor with Variable Frequency Drive.

  • 06 Highly sensitive photoelectric scanner to monitor the pouch length and the cutting position. Also I-mark position can be adjusted in running condition.

  • 07 Epoxy liquid painted structure with SS 304 safety guards and electric control panel (optional as per selection).

  • 08 Hopper feeding with belt conveyor and auto stack selection by pusher and loader.

  • 09 End cutter and sealer have provision for single jaw system .

  • 10 Overall durable, compact, practical, low maintenance and affordable. Suitable for working long hours without breakdown and without need of constant supervision.